View SIL15F-12S1V0-VJ_232680.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

12 Vin single output
DC-DC CONVERTERS Typhoon Non-isolated
Preliminary Data - subject to change without notice 1
SIL15F Series
* Designed to meet ultra fast transient requirements: 300 A/s step load transients * 15 A current rating * Input voltage range: 8 Vdc to 13.2 Vdc * Output voltage range: 1.0 Vdc to 1.8 Vdc * Extremely low internal power dissipation * Minimal thermal design concerns * Ideal solution where board space is at a premium or tighter card pitch is required * Industry standard surface-mount footprint * RoHS compliant
The SIL15F-12 series are non-isolated dc-dc converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from a 12 V source. The SIL15F-12 has an input range of 8 Vdc to 13.2 Vdc and offers an output voltage range from 1.0 Vdc to 1.8 Vdc with a 15 A load, which allows for maximum design flexibility and a pathway for future upgrades. The SIL15F-12 is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface-mount technology and automated manufacturing techniques, the SIL15F-12 offers compact size and efficiencies of 85% typical at 1.8 Vout.
NEW Product
2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25 C unless otherwise stated Cin = 270 F, Cout = 0 F OUTPUT SPECIFICATIONS Voltage adjustability Setpoint accuracy Line regulation Load regulation Minimum load Overshoot/undershoot Ripple and noise Temperature co-efficient Transient response (1.2 Vout) di/dt 200 A/s (See Note 3) 5 Hz to 20 MHz Trimmable 10% 3.5% typ. 1.0% typ. 2.0% typ. 0A None 40 mV pk-pk 25 mV rms 0.01%/C 5 A load step 100 mV max. deviation <10 s recovery to within 1.0% 10% Vo compensation GENERAL SPECIFICATIONS Efficiency Insulation voltage Switching frequency Vin = 12 V, Vout = 1.2 V Approvals and standards Material flammability Dimensions Weight MTBF 8-13.2 Vdc No load 100 mA 2.0 A max. @ Io max. and Vout = 1.2 V 100 mA rms (See Note 1) 5 ms Telcordia SR-332 (LxWxH) Variable Vin = 12 V, Vout = 1.8 V 84% typ. Non-isolated 500 kHz typ. EN60950 UL/cUL60950 UL94V-0 50.80 x 8.50 x 12.70 mm 2.0 x 0.335 x 0.50 inches 5 g (0.18 oz) TBD hours EMC CHARACTERISTICS Electrostatic discharge Conducted immunity Radiated immunity EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3
SPECIFICATIONS
Remote sense INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) Input reflected ripple Remote ON/OFF Start-up time
ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Figure 1) Operating ambient, temperature Non-operating -40 C to +85 C -40 C to +125 C
PROTECTION Short-circuit Thermal Continuous Automatic recovery
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. E174104 UL 60950 File No. E174104 TUV Product Service (EN60950) Certificate No. B 04 04 38572 041 CB report and certificate to IEC60950
File Name: silL15f_12.pdf Rev (01): 16 Dec 2005
12 Vin single output
DC-DC CONVERTERS Typhoon Non-isolated
Preliminary Data - subject to change without notice 2
SIL15F Series
OUTPUT VOLTAGE 1V 1.2 V 1.5 V 1.8 V OUTPUT CURRENT (MIN.) 0A 0A 0A 0A OUTPUT CURRENT (MAX.) 15 A 15 A 15 A 15 A
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
OUTPUT POWER (MAX.) 15.0 W 18.0 W 22.5 W 27.0 W
NEW Product
INPUT VOLTAGE 8-13.2 Vdc 8-13.2 Vdc 8-13.2 Vdc 8-13.2 Vdc
EFFICIENCY (TYP.) 81% 82% 83% 84%
REGULATION LINE 1.0% 1.0% 1.0% 1.0% LOAD 2.0% 2.0% 2.0% 2.0%
MODEL NUMBER(1,4,5) SIL15F-12S1V0-VJ SIL15F-12S1V2-VJ SIL15F-12S1V5-VJ SIL15F-12S1V8-VJ
Part Number System with Options
SIL15F-12S1V2-VJ
Packaging Options (4) J = Pb-free (RoHS 6/6 compliant) Mounting Option V = Vertical Through-Hole Output Voltage 1V0 = 1.0 Vdc, 1V2 = 1.2 Vdc 1V5 = 1.5 Vdc, 1V8 = 1.8 Vdc Type of Output S = Single Input Voltage 12 = 8 Vdc to 13.2 Vdc
Product Family SIL = Single-In-Line Mount Rated Output Current 15 = 15 Amps Performance F = Enhanced/Fast Transient Performance
Notes
1 The SIL15F-12 features an `Active High' Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SIL15F-12: Configuration Remote pin open circuit Remote pin pulled low Remote pin pulled high Converter Operation Unit is ON Unit is OFF Unit is ON
2 3 4 5
An `Active Low' Remote ON/OFF version is also possible with this converter. To order please place the suffix `R' toward the end of the part number, e.g. SIL15F-12S1V8-VRJ. A 270 F electrolytic input capacitor maybe required for test purposes only. An external output capacitor is not required for basic operation. Adding distributed capacitance at the load will improve the transient response. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative.
File Name: silL15f_12.pdf Rev (01): 16 Dec 2005
12 Vin single output
DC-DC CONVERTERS Typhoon Non-isolated
Preliminary Data - subject to change without notice 3
SIL15F Series
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
NEW Product
OUTPUT CURRENT (A)
OUTPUT CURRENT (A)
15 12 9 6 3 0 0 30 60 90
0 LFM 200 LFM 400 LFM
15 12 9 6 3 0 0 30 60 90
0 LFM 200 LFM 400 LFM
TEMPERATURE (C)
Figure 1 - Derating Curve Vin = 12 V, Output Voltage = 1.0 V (See Note A)
TEMPERATURE (C)
Figure 2 - Derating Curve Vin = 12 V, Output Voltage = 1.8 V (See Note A)
+Vsense
Vin SIL15F Trim pin ON/OFF
Vout
Rtrimdown R Load Rtrimup
Common
Figure 3 - Typical Transient Response, Vin = 12 V, Vout = 1.2 V Channel 1: 5 A Load Step, di/dt = 100 A/s Channel 2: Deviation on Unit, Recovery Time = 10 s
Figure 4 - Standard Application
Notes
A The derating curve represents the conditions at which internal components are within the Artesyn derating guidelines.
File Name: silL15f_12.pdf Rev (01): 16 Dec 2005
12 Vin single output
DC-DC CONVERTERS Typhoon Non-isolated
Preliminary Data - subject to change without notice 4
SIL15F Series
2.000 (50.80)
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
NEW Product
0.500 (12.70)
BACK VIEW
0.640 (16.26)
0.335 (8.50) MAX. 1.550 (39.36) 1.650 (41.90) 1.750 (44.44) 1.850 (46.98) 1.950 (49.52)
0.350 (8.88) 0.450 (11.42) 0.550 (13.96)
0.000 (0.00)
0.050 (1.27) 0.150 (3.80)
12345
FRONT VIEW
678
10 11 All dimensions in inches (mm) All tolerance 0.010in (0.25mm) unless otherwise stated
0.025(0.64) x 0.025(0.64) Connector 14 places
PIN CONNECTIONS PIN NO. 1 2 3 4 5 6 7 8 10 11 FUNCTION +Vout +Vout Remote Sense+ +Vout Ground Ground +Vin +Vin Trim Remote ON/OFF
Figure 5 - Mechanical Drawing and Pinout Table
Datasheet (c) Artesyn Technologies(R) 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items: Application Note
www.artesyn.com
File Name: silL15f_12.pdf Rev (01): 16 Dec 2005

▲Up To Search▲

Price & Availability of SIL15F-12S1V0-VJ

	To Download SIL15F-12S1V0-VJ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .